Sona-Trol and Stand-1

• Non-contact Variable speed Loop control
• Works on Virtually any material including paper, film or foil.

• Will not mark, Scratch, dent, or tear sensitive materials

ST-6 Standard Features

• MRSH-Rev1 5" to 20’ - best for diameter measurement
• MRSH-rev2 18" to 20’ - best for loop control
• Adjustable gain
• 10’ sensor head cable
• Oil tight JIC enclosure
• Electrically isolated sensor
• Adjustable distance zero offset
• Adjustable Receiver sensitivity

Includes an exclusive circuit that allows use in applications where bouncing strips are likely to cause false measurements.

This proprietary circuit detects false signals and rejects them allowing SONA-TROL

to give proper take-up and Payoff smoothness regardless of strip bounce or sway.

Optional Features                    Custom 8 drive system for printing machine

• Air pressure output
• PID output board
• RMS output board
• Sensor cables to 1000 feet
• Multiple sensors for a wide sensing area
• Adjustable measurement rate
• Limit switch outputs (up to 20 per sensor)
• Sensor Array Sequencer (up to 128 sensors)
• High Resolution sensors 3"to 24" and 5" to 48" range
• Digital or analog readout of distance, height, or diameter of objects
• Readouts can be scaled to measure volume of liquids or solids in tanks
• Wide range of voltage and current loop outputs

SONA-TROL Patented analog output NON CONTACT loop control is not limited to loop control applications

SONA-TROL can be used to control levels of liquids and solids in tanks

SONA-TROL Can be used to control unwind and rewind tension

SONA-TROL Can be used to detect the presence or absence of pallets in automated warehouses.

SONA-TROL Can measure changes as small as .010 inches

SONA-TROL Now comes in many models with a variety of standard and optional features that allow you to configure the optimum NON contact sensing and control system for your application