Stand Mounted super dancer
Electronic Dancer Arm Position ControllerSUPER DANCER incorporates state of the art electronic circuitry which
eliminates the use of a typical potentiometer. Most dancer arm applications use
potentiometers which have a very short life span and cause very expensive down time. By
eliminating the potentiometer there is virtually no physical wear and tear eliminating
down time.
SUPER DANCER state of the art electronic circuitry allows easy adjustments of your loops
zero to full speed set points. There is no need for repositioning the potentiometer to
allow for a different loop height or changing dancer arm gears for a different RPM /inch
speed range. These adjustments may be made while equipment is still in operation which
eliminates even more costly down time!
SUPER DANCER state of the art electronic circuitry incorporates PID output functions as a
standard feature. The PID feature automatically integrates to achieve minimum loop height
changes and is a must for fast changing line speeds such as Roll Forming applications and
high speed feeding applications!
SUPER DANCER can be applied in straightener, rewind or unwind applications, etc.. and
supplies an isolated analog dc voltage to control virtually any DC or AC drive control.
| Basic unit is an open chassis type with the analog prox included. Add enclosure arm stand and limit if required. add other options for special systems. (consult factory)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
