[Company Logo Image] Waddington Electronics Inc.

Home Up Feedback Contents Search

Strip Feeds
SF Series LD series TRUE FEED Series PLF series MD series LC series HD series TWIN TOP roll Push Pull Twin Drive Multislide ZigZag Belt Feed Wire Feed Strip Feeds Lam Feeds Feeder Straightener Options Photos tech Brief CR Controls CL Controls

 

 

Home
Up

 

 

Cut Strip Feeds

Push Pull Feed system configured such that operator or robot can start material between the feed rolls.

At the signal of the operator or a strip loader the feed rolls will close on material, feed to a sensor to accurately locate the leading edge of the strip, then feed from sensor to 1st die station.

The feed will index the part through the die station until such time as the output feed can takeover.  Additional registration moves can be performed while punching to insure proper registration to preprinted or pre punched features.

The output feed (pull feed) will continue feeding the part until the part is complete and then execute a long feed to eject the strip while the in feed is queuing up the next strip and can have it in position between press strokes to allow the press to run cut strips in a continuous run mode.

Custom rolls can be designed and built to feed formed strips such as L's and U shaped Channels

 

 

WB01339_.gif (896 bytes) Options and Accessories

 

 

 

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
 Send company literature
 Have a salesperson contact me
 

Name
Title
Company
Address
E-mail
Phone

 

 

[ Home ] [ Up ]

Send mail to sales@waddingtonelectronics.com with questions or comments about this web site.
Copyright © 2008 Waddington Electronics Inc.
Last modified: 08/19/08